From: Bob Rech (brech@kc.rr.com)
Date: Mon Nov 18 2002 - 19:25:42 GMT-3
Did you configure the virtual area on r2 as well, if not r2 is probably
getting console messages complaining about the virtual area.
----- Original Message -----
From: "syv" <syv@911networks.com>
To: <ccielab@groupstudy.com>
Sent: Monday, November 18, 2002 2:58 PM
Subject: Virtual links & Frame-relay
> Hi,
>
> I am trying to get a virtual-link work across a frame-relay
>
> R1-------R2------FR------R3------R4---
> AREA 0---|AREA10---------|AREA 100|area 500
>
> R2 is the DR: router-id 0.0.0.2
>
> On R3: I have:
>
> router ospf 10
> router-id 0.0.0.3
> area 10 virtual-link 0.0.0.2
> network 192.168.6.0 0.0.0.255 area 500
> network 192.168.10.0 0.0.0.255 area 10
>
> I get:
> Virtual Link OSPF_VL3 to router 0.0.0.2 is down
> Run as demand circuit
> DoNotAge LSA allowed.
> Transit area 10, Cost of using 65535
> Transmit Delay is 1 sec, State DOWN,
> Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
>
> I need to set the timers to:
>
> Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
>
> with: area 10 virtual-link 0.0.0.2 hello 30 dead 120 I get:
>
> Timer intervals configured, Hello 30, Dead 120, Wait 40, Retransmit 5
>
> How do I set the Wait to 120?
>
> Any suggestion?
>
> --
> Thanks
> syv@911networks.com
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:05 GMT-3