From: Robert Massiache (robert2140@hotmail.com)
Date: Mon Nov 18 2002 - 19:24:55 GMT-3
Hi,
I dont remember if I configured 'wait' factor ever.
Can you form adj between R2 and R3 over FR? If so you should not have any
problem maintiang a vir link.
thanks
Robert M
>From: syv <syv@911networks.com>
>Reply-To: syv <syv@911networks.com>
>To: ccielab@groupstudy.com
>Subject: Virtual links & Frame-relay
>Date: Mon, 18 Nov 2002 12:58:30 -0800
>
>Hi,
>
>I am trying to get a virtual-link work across a frame-relay
>
>R1-------R2------FR------R3------R4---
>AREA 0---|AREA10---------|AREA 100|area 500
>
>R2 is the DR: router-id 0.0.0.2
>
>On R3: I have:
>
>router ospf 10
> router-id 0.0.0.3
> area 10 virtual-link 0.0.0.2
> network 192.168.6.0 0.0.0.255 area 500
> network 192.168.10.0 0.0.0.255 area 10
>
>I get:
>Virtual Link OSPF_VL3 to router 0.0.0.2 is down
> Run as demand circuit
> DoNotAge LSA allowed.
> Transit area 10, Cost of using 65535
> Transmit Delay is 1 sec, State DOWN,
> Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
>
>I need to set the timers to:
>
>Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
>
>with: area 10 virtual-link 0.0.0.2 hello 30 dead 120 I get:
>
>Timer intervals configured, Hello 30, Dead 120, Wait 40, Retransmit 5
>
>How do I set the Wait to 120?
>
>Any suggestion?
>
>--
>Thanks
>syv@911networks.com
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:05 GMT-3