From: Hunt Lee (huntl@webcentral.com.au)
Date: Mon Nov 18 2002 - 01:34:57 GMT-3
Hi All,
Can someone please explain to me what the following dialer-list statement
does (at RTA)??
access-list 102 permit ip any host 192.168.10.1
dialer-list 1 protocol ip list 102
RTA - Calling router
RTB - Called router
By that, I would think that the RTA will only trigger the ISDN to dial to
RTB only if the RTA is initiating any traffic to 192.168.10.1 (ISDN
Connecting interface of RTB). However, CCO claims that ISDN will also be
triggered by the IPSec traffic to a different IP (201.10.0.1). Even though
I am confused what IPSec will make any difference if the destination isn't
towards 192.168.10.1?
http://www.cisco.com/en/US/tech/tk13/tk133/technologies_configuration_exampl
e09186a0080093c09.shtml
Any Ideas? ive got no clue.
Cheers
HL
-- WebCentral Pty Ltd Australia's #1 Internet Web Hosting Company Level 1, 96 Lytton Road. Network Operations - Systems Engineer PO Box 4169, East Brisbane. email: huntl@webcentral.com.au Queensland, Australia. phone: +61 7 3249 2553
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:04 GMT-3