From: Curtis Phillips (cphillips@suscom.net)
Date: Fri Nov 15 2002 - 15:19:14 GMT-3
Yeah, thanks Dean. I had seen that, but it doesnt really address my
questions as specifically as I would have preferred.
----- Original Message -----
From: "Dean Whitley" <dean.whitley@epscorp.com>
To: "'Curtis Phillips'" <cphillips@suscom.net>; <ccielab@groupstudy.com>
Sent: Friday, November 15, 2002 12:07 PM
Subject: RE: Slightly off topic: Rules and design guidelines for
implementing T1 at customer premise.
> Curtis,
>
> This has been posted before, but it has been a while.
>
> http://www.dcbnet.com/notes/9611t1.html
>
> Dean
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Curtis Phillips
> Sent: Friday, November 15, 2002 11:26 AM
> To: ccielab@groupstudy.com
> Subject: Slightly off topic: Rules and design guidelines for
> implementing T1 at customer premise.
>
>
> Hello all,
>
> I am trying to find some definitive information concerning T1 demarcs, T1
> extenders
> and cable type, length for the span between the demarc and the CPE.
>
> What questions specifically are:
>
> What is the maximum length that cable can be run from the demarc with and
> without signal regeneration?
> What options and products are available for copper repeaters/amplifiers?
> What
> is the max distance with this option?
> What options and products are available for fiber conversion/extention of
> same?
>
> What are the best practices and rules of thumb?
>
>
> Any direct information or URLs to definitive resources is apprecited.. :-)
>
>
> Thanks and regards,
>
> Curtis
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:01 GMT-3