Re: 3550 and 3500 etherchannel

From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Thu Nov 14 2002 - 03:49:43 GMT-3

• Next message: dunne.brian@adlittle.com: "RE: NAT problem"
• Previous message: Erick B.: "RE: all you guys with 2610's/11's out there"
• Maybe in reply to: Szeto Jeff: "3550 and 3500 etherchannel"
• Next in thread: Weidong Xiao: "RE: 3550 and 3500 etherchannel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I don't see the etherchannel configuration on the 3500XL ?

                                                                                                                                       
                      "Szeto Jeff"
                      <jytszeto@hotmail To: ccielab@groupstudy.com
                      .com> cc:
                      Sent by: Subject: 3550 and 3500 etherchannel
                      nobody@groupstudy
                      .com
                                                                                                                                       
                                                                                                                                       
                      14-11-2002 14:11
                      Please respond to
                      "Szeto Jeff"
                                                                                                                                       
                                                                                                                                       

Hi Group,

I created a etherchannel between a 3500xl and a 3550.
The following error appear in the 3500xl switch.

3d00h: %RTD-1-ADDR_FLAP: FastEthernet0/9 relearning 9 addrs per min
cat3500#
3d00h: %RTD-1-ADDR_FLAP: FastEthernet0/9 relearning 9 addrs per min
cat3500#
3d00h: %RTD-1-ADDR_FLAP: FastEthernet0/9 relearning 9 addrs per min

What is the error about?

The related config of the two switches:

3500XL

interface FastEthernet0/9
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface FastEthernet0/10
switchport trunk encapsulation dot1q
switchport mode trunk

3550

interface Port-channel1
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address

interface FastEthernet0/9
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
channel-group 1 mode on
!
interface FastEthernet0/10
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
channel-group 1 mode on

Thank you very much.

Jeff

• Next message: dunne.brian@adlittle.com: "RE: NAT problem"
• Previous message: Erick B.: "RE: all you guys with 2610's/11's out there"
• Maybe in reply to: Szeto Jeff: "3550 and 3500 etherchannel"
• Next in thread: Weidong Xiao: "RE: 3550 and 3500 etherchannel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:59 GMT-3