Re: Recommended Initial Commands

From: kym blair (kymblair@hotmail.com)
Date: Wed Nov 13 2002 - 07:51:36 GMT-3

• Next message: csc david: "about ip tcp intercept"
• Previous message: Raymond: "QoS parameter value"
• Maybe in reply to: Nate Kleven: "Recommended Initial Commands"
• Next in thread: JuniJinn@aol.com: "Re: Recommended Initial Commands"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

ip classless
ip subnet-zero

line con 0
  escape 27
  logging synch
line vty 0 4
  escape 27
  logging synch

Also, enable password and your favorite aliases. Kym

>From: Nate Kleven <cciemail@intellinet.ws>
>Reply-To: Nate Kleven <cciemail@intellinet.ws>
>To: ccielab@groupstudy.com
>Subject: Recommended Initial Commands
>Date: Mon, 11 Nov 2002 22:06:05 -0800
>
>What are good commands to enter in the routers when you first hit the rack?
>Here is a list that I have come up with for starters:
>
>no ip domain-lookup
>ip tcp synwait 5
>line con 0
> exec-timeout 600
> privi level 15
>
>Any other ideas? Also, without breaking an NDA, does anyone know if you
>are
>allowed to use NOTEPAD?
>
>__________
>
>Nate Kleven
>
>Senior Network Engineer, CCNP Voice Access, MCSE
>
>Expanets
>
>6020 So 190th ST
>
>Kent, WA 98032
>
>(206)219.6135
>
>"Experienced at Networked Solutions"

• Next message: csc david: "about ip tcp intercept"
• Previous message: Raymond: "QoS parameter value"
• Maybe in reply to: Nate Kleven: "Recommended Initial Commands"
• Next in thread: JuniJinn@aol.com: "Re: Recommended Initial Commands"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:58 GMT-3