From: tsiartas@ameritech.net
Date: Tue Nov 12 2002 - 20:03:19 GMT-3
Does anybody know the memory requirements for a CBAC router?
I think you have to calculate certain bytes per statfull session.
Was wondering what would it be the recommended memory for a border
router
With CBAC and how much should we add on it for an internet BGP table.
Thanks
h
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joe A
Sent: Tuesday, November 12, 2002 4:08 PM
To: 'Peng Zheng'; 'MADMAN'
Cc: ccielab@groupstudy.com
Subject: RE: upgrade 2501 pro
This second router has 2M dedicated I/O memory, whereas the previous one
doesn't, and therefore uses DRAM for that purpose. Again, that's just a
change to the architecture, that's all.
Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Peng Zheng
Sent: Tuesday, November 12, 2002 4:19 PM
To: MADMAN
Cc: ccielab@groupstudy.com
Subject: Re: upgrade 2501 pro
But on other 2501 router, I got:
cisco 2500 (68030) processor (revision D) with
16384K/2048K bytes of memory.
--- MADMAN <dave@interprise.com> wrote:
> It's right under your nose;) 14336 + 2948 = 16M
>
> 2M is dedicated to I/O
>
> Dave
>
> Peng Zheng wrote:
> >
> > I upgraded my CPA 2501 pro to 2501, and upgraded
> both
> > flash and mem. I installed 16M mem, but it
> displayed:
> >
> > cisco 2500 (68030) processor (revision L) with
> > 14336K/2048K bytes of memory.
> >
> > where is other 2M?
> >
> > How can I make it 16M?
> >
> > Thanks you for help.
> >
> > __________________________________________________
> > Do you Yahoo!?
> > U2 on LAUNCH - Exclusive greatest hits videos
> > http://launch.yahoo.com/u2
>
> --
> David Madland
> CCIE# 2016
> Sr. Network Engineer
> Qwest Communications
> 612-664-3367
>
> "You don't make the poor richer by making the rich
> poorer." --Winston
> Churchill
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:57 GMT-3