From: Peng Zheng (zpnist@yahoo.com)
Date: Tue Nov 12 2002 - 20:01:38 GMT-3
Thanks for all reply.
--- Joe A <groupstudy@comcast.net> wrote:
> This second router has 2M dedicated I/O memory,
> whereas the previous one
> doesn't, and therefore uses DRAM for that purpose.
> Again, that's just a
> change to the architecture, that's all.
>
> Joe
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Peng Zheng
> Sent: Tuesday, November 12, 2002 4:19 PM
> To: MADMAN
> Cc: ccielab@groupstudy.com
> Subject: Re: upgrade 2501 pro
>
>
> But on other 2501 router, I got:
> cisco 2500 (68030) processor (revision D) with
> 16384K/2048K bytes of memory.
>
> --- MADMAN <dave@interprise.com> wrote:
> > It's right under your nose;) 14336 + 2948 = 16M
> >
> > 2M is dedicated to I/O
> >
> > Dave
> >
> > Peng Zheng wrote:
> > >
> > > I upgraded my CPA 2501 pro to 2501, and upgraded
> > both
> > > flash and mem. I installed 16M mem, but it
> > displayed:
> > >
> > > cisco 2500 (68030) processor (revision L) with
> > > 14336K/2048K bytes of memory.
> > >
> > > where is other 2M?
> > >
> > > How can I make it 16M?
> > >
> > > Thanks you for help.
> > >
> > >
> __________________________________________________
> > > Do you Yahoo!?
> > > U2 on LAUNCH - Exclusive greatest hits videos
> > > http://launch.yahoo.com/u2
> >
> > --
> > David Madland
> > CCIE# 2016
> > Sr. Network Engineer
> > Qwest Communications
> > 612-664-3367
> >
> > "You don't make the poor richer by making the rich
> > poorer." --Winston
> > Churchill
>
>
> __________________________________________________
> Do you Yahoo!?
> U2 on LAUNCH - Exclusive greatest hits videos
http://launch.yahoo.com/u2
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:57 GMT-3