From: Sean Garrett (sgarrett@ci.santa-maria.ca.us)
Date: Mon Nov 11 2002 - 17:35:01 GMT-3
Sam
I believe this is what you were looking for.
I found this in Catalyst 3550 Full Configuration Guide.pdf
"For channel-group-number, the range is 1 to 64. This number must be the
same as
the port-channel-number (logical port) configured in the "Creating
Port-Channel
Logical Interfaces" section on page 19-11.
Each EtherChannel can have of up to eight compatibly configured Ethernet
interfaces."
HTH
Sean
-----Original Message-----
From: Sam.MicroGate@usa.telekom.de [mailto:Sam.MicroGate@usa.telekom.de]
Sent: Monday, November 11, 2002 8:37 AM
To: ccielab@groupstudy.com
Subject: EtherChannel
Hello everyone,
In configuring the EtherChannel for layer 3 interfaces, does the
port-channel number have to be the same as the channel-group number? Easy
one but there is no definite answer in the doc.
Sam
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:56 GMT-3