From: Andrew Bratchell (a.bratchell@caeuk.com)
Date: Mon Nov 11 2002 - 07:59:37 GMT-3
Nathan,
Dialer Watch was buggy and unreliable until later versions of 12.1 code.
Cisco recommend 12.1(7) or greater. If you are running earlier code, you can run into problems like that.
Andy
-----Original Message-----
From: Nathan Chessin [mailto:nchessin@cisco.com]
Sent: 11 November 2002 08:22
To: ccielab@groupstudy.com
Subject: Dialer Watch Issues
Hi All,
I am having trouble with dialer watch. The backup (bri) interface comes up
all right, but it doesn't go down when the primary comes back up.
My routing table looks like:
Gateway of last resort is not set
R 3.0.0.0/8 [120/1] via 10.1.1.3, 00:00:27, BRI1/0
[120/1] via 20.1.1.3, 00:00:27, Serial0/2
R 4.0.0.0/8 [120/1] via 10.1.1.3, 00:00:27, BRI1/0
[120/1] via 20.1.1.3, 00:00:27, Serial0/2
20.0.0.0/24 is subnetted, 1 subnets
C 20.1.1.0 is directly connected, Serial0/2
R 5.0.0.0/8 [120/1] via 10.1.1.3, 00:00:27, BRI1/0
[120/1] via 20.1.1.3, 00:00:27, Serial0/2
10.0.0.0/24 is subnetted, 1 subnets
C 10.1.1.0 is directly connected, BRI1/0
What are the issues with the serial interface coming back up, and not being
able to get the dialer watch bri down?
Nate
**********************************************************************
Disclaimer
This email is confidential and intended solely for the use of
the individual to whom it is addressed. Any views or opinions
presented are solely those of the author and do not necessarily
represent those of CAE Office Systems. If you are not the
intended recipient, be advised that you have received this
email in error, and that any use, dissemination, forwarding,
printing or copying of this email is strictly prohibited. If you
received this email in error, please contact Lee Gatland on
+44 (0) 1923 477600
**********************************************************************
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:56 GMT-3