Etherchannel

From: KIP (knowledge_is_power@btopenworld.com)
Date: Sat Nov 09 2002 - 08:42:15 GMT-3

• Next message: Hedi Abdelkafi: "Enabling RTP Compression of PTP Frame-Relay interface"
• Previous message: Hedi Abdelkafi: "Class-Based Shaping and FRTS"
• Next in thread: Chuck Church: "Re: Etherchannel"
• Maybe reply: Chuck Church: "Re: Etherchannel"
• Maybe reply: Erick B.: "Re: Etherchannel"
• Maybe reply: anthony ohanusi: "Re: Etherchannel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

Just wondering can anyone offer advice.

Have the following topology:

Router - Switch - Router

configured with:

Router (Etherchannel 2 FE) - Switch (Nothing, just regular VLAN) -

Router(Etherchannel 2 FE)

problem is no traffic seems to go out on second FE's....

I understand that Etherchannel on Router is based around and EX-OR on the

Source/ Dest IP......

I have tried all flavors of IP source/ dest...and no traffic exits on second

FE.....although I know Etherchannl is working as when I fail one FE, its

kicks over to second immmedaitely....thoughts ??????

Also I would have expected each FE Interface to use its own MAC for packets,

so that if a switch sits in the middle, there are individual MAC's against

the port...but it appears to use a single MAC which is assigned to the Port

Channel interface...

any advice appreciated...

KIP

• Next message: Hedi Abdelkafi: "Enabling RTP Compression of PTP Frame-Relay interface"
• Previous message: Hedi Abdelkafi: "Class-Based Shaping and FRTS"
• Next in thread: Chuck Church: "Re: Etherchannel"
• Maybe reply: Chuck Church: "Re: Etherchannel"
• Maybe reply: Erick B.: "Re: Etherchannel"
• Maybe reply: anthony ohanusi: "Re: Etherchannel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:55 GMT-3