From: Brian McGahan (brian@cyscoexpert.com)
Date: Fri Nov 08 2002 - 21:12:11 GMT-3
Peter,
Prefix-lists are used to match on prefix and prefix-length
pairs. Normal prefix-list syntax is as follows:
Ip prefix-list LIST permit w.x.y.z/len
Where w.x.y.z is your exact prefix
And where len is your exact prefix-length
"Ip prefix-list LIST permit 1.2.3.0/24" would be an exact match for the
prefix 1.2.3.0 with a subnet mask of 255.255.255.0. This does not match
1.2.0.0/24, nor does it match 1.2.3.4/32, nor anything in between.
When you add the keywords "GE" and "LE" to the prefix-list, the "len"
value changes its meaning. When using GE and LE, the len value
specifies how many bits of the prefix you are checking, starting with
the most significant bit.
Ip prefix-list LIST permit 1.2.3.0/24 le 32
This means:
Check the first 24 bits of the prefix 1.2.3.0
The subnet mask must be less than or equal to 32
This equates to the access-list syntax:
Access-list 1 permit host 1.2.3.0
Ip prefix-list LIST permit 0.0.0.0/0 le 32
This means:
Check the first 0 bits of the prefix 0.0.0.0
The subnet mask must be less than or equal to 32
This equates to anything
Ip prefix-list LIST permit 0.0.0.0/0
This means:
The exact prefix 0.0.0.0, with the exact prefix-length 0.
This is matching a default route.
Ip prefix-list LIST permit 10.0.0.0/8 ge 21 le 29
This means:
Check the first 8 bits of the prefix 10.0.0.0
The subnet mask must be greater than or equal to 21, and less than or
equal to 29.
Ip prefix-list CLASS_A permit 0.0.0.0/1 ge 8 le 8
This matches all class A addresses with classful masks. It means:
Check the first bit of the prefix, it must be a 0.
The subnet mask must be greater than or equal to 8, and less than or
equal to 8. (It is exactly 8)
When using the GE and LE values, you must satisfy the condition:
Len < GE <= LE
Therefore:
Ip prefix-list LIST permit 1.2.3.0/24 ge 8
Is not a valid list.
What you can not do with the prefix-list is match on arbitrary bits like
you can in an access-list. Prefix-lists cannot be used to check if a
number is even or odd, nor check if a number is divisible by 15, etc...
Bit checking in a prefix-list is sequential, starting with the most
significant (leftmost) bit.
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> peter brown
> Sent: Friday, November 08, 2002 3:11 PM
> To: ccielab@groupstudy.com
> Subject: ip prefix- list le and ge
>
> I need help with understanding ip prefix-list
> concerning when to use ge and le. Any help we be appreciated.
>
> Peter
>
>
> _________________________________________________________________
> Protect your PC - get McAfee.com VirusScan Online
> http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:55 GMT-3