From: Debbie Westall (dwestall@debbie.coxfiber.net)
Date: Tue Nov 05 2002 - 10:57:33 GMT-3
Paul,
When you do a show version the serial number that comes up is the serial
number of the motherboard, not the chassis. This has been the topic of
discussion before on this, and there is no way to come up with the serial
number without standing in front of the box.
If you have snmp running on the box you can put the serial number in for
information purposes, but that's after you get that number from the
chassis.
Debbie
On Tue, 5 Nov 2002, Casey, Paul (6822) wrote:
> Hello,
>
> Is it possible to get the serial number off a router once you have deployed
> it in the field, by using a show command.
> I dont want to have to go to site to check it for the support contract.
>
> Any info appreciated.
> Kind regards.
> Paul.
>
>
> Paul Casey
> O2 Ireland
> Core Network Eng'g Team
> 76 Lower Baggot Street, Dublin 2.
> > * Mob : +353 86 8143310
> E-mail: paul.casey@o2.com
>
> PLEASE NOTE THAT THE ABOVE IS CONFIDENTIAL INFORMATION I
>
> > See what you can do www.o2.ie
> >
>
>
> ****************************************************************************************
>
> This E-mail is from O2. The E-mail and any files
> transmitted with it are confidential and may also be privileged and intended
> solely for the use of the individual or entity to whom they are addressed.
> Any unauthorised direct or indirect dissemination, distribution or copying
> of this message and any attachments is strictly prohibited. If you have
> received the E-mail in error please notify postmaster@O2.com or
> telephone ++ 353 1 6095000.
>
> *****************************************************************************************
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:53 GMT-3