From: Stuart Juggins (sjuggins@cisco.com)
Date: Tue Nov 05 2002 - 11:07:13 GMT-3
Hi Paul,
Unfortunately you can't find out the serial number once a router is in the
field (afaik) from any show command. I had a case once on the same problem
and I had to tell the customer that it wasn't possible :(
Stuart J
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Casey, Paul (6822)
Sent: 05 November 2002 13:29
To: ccielab@groupstudy.com
Subject: Serial numbers
Hello,
Is it possible to get the serial number off a router once you have deployed
it in the field, by using a show command.
I dont want to have to go to site to check it for the support contract.
Any info appreciated.
Kind regards.
Paul.
Paul Casey
O2 Ireland
Core Network Eng'g Team
76 Lower Baggot Street, Dublin 2.
> * Mob : +353 86 8143310
E-mail: paul.casey@o2.com
PLEASE NOTE THAT THE ABOVE IS CONFIDENTIAL INFORMATION I
> See what you can do www.o2.ie
>
****************************************************************************
************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
****************************************************************************
*************
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:53 GMT-3