From: Chuck Church (cchurch@MAGNACOM.com)
Date: Sun Nov 03 2002 - 18:23:40 GMT-3
If there are no physical ports in a particular vlan up, then that vlan
inteface on the MSFC will show down. Bring up a physical vlan 1 port or a
trunk, and the vlan int should come up.
Chuck Church
CCIE #8776, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage, NY 10989
845-267-4000
Why would vlan 1 ever show down/down on a 6509's MSFC Cisco Switch
excluding config problems?
Thanks,
Danny Rising, II
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:52 GMT-3