From: Ayman Hamza (ayhamza@cisco.com)
Date: Sun Nov 03 2002 - 12:02:52 GMT-3
Hi Chris;
Many thanks. But still How I can calculate the Byte counts !!!?
For CBWFQ , Yes I agree it can solve it , but still it is saying to use
Custome-queueing . Any help in this !!
Ayman
> From clarson52@comcast.net Sun Nov 3 15:32:37 2002
> Date: Sun, 03 Nov 2002 09:25:47 -0500
> From: Chris <clarson52@comcast.net>
> Subject: Re: Heeelp!! Urgent !! CCIE question about CQ
> To: Ayman Hamza <ayhamza@cisco.com>, Sam.MicroGate@usa.telekom.de,
> ccielab@groupstudy.com
> MIME-version: 1.0
> X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
> X-Mailer: Microsoft Outlook Express 6.00.2800.1106
> Content-transfer-encoding: 7BIT
> X-Priority: 3
> X-MSMail-priority: Normal
>
> You would need to use an access-list to define the traffic for a queue
>
> queue-list 1 proto dlsw 2
>
>
>
> ----- Original Message -----
> From: "Ayman Hamza" <ayhamza@cisco.com>
> To: <Sam.MicroGate@usa.telekom.de>; <ccielab@groupstudy.com>
> Sent: Sunday, November 03, 2002 8:23 AM
> Subject: Heeelp!! Urgent !! CCIE question about CQ
>
>
> > Team;
> >
> > Sorry for that high urgency. I have a question from a CCIE LAB exam which
> > saying - exact wording - :
> >
> > -----------------------------------------------------------------
> >
> > On a router that you have DLSw+ config , configure CQ such that the
> > DLSw+ traffic coming from ethernet interfaces to be allocated 50% of the
> > outbound interface over which the DLSw+ session will be established.
> >
> > -----------------------------------------------------------------
> >
> >
> > I don't really how to resolve this! If I configured queue-list for the
> > traffic coming from ethernet interface that SNA/Netbios staions are
> setting,
> > How I can specify in the queue-list command a definition that
> > associates the DLSw+traffic and incoming interface traffic at teh sametime
> ???!
> >
> > I mean:
> >
> > queue-list 1 interface ethernet0 1
> >
> > There is nothing in the above command that let me associates the traffic
> > coming from ethernet0 with DLSW+, the above command gives a defintion for
> > all the traffic coming from ethrnet 0 whether it's DLSw+ related or not!
> How
> > I can solve this. More over, How I can specify the correct Byte
> counts!!!!!
> >
> >
> > Appreciating any reply!
> >
> >
> > Regards;
> > Ayman
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:51 GMT-3