From: peter brown (pita40@hotmail.com)
Date: Sun Nov 03 2002 - 11:54:31 GMT-3
queue-list 1 protocol ip 1 tcp 2065
queue-list 1 default 2
queue-list 1 queue 1 byte-count 5000
queue-list 1 queue 2 byte-count 5000
then apply this queue-list to e0
2065 is dlsw port
If you were asked to distinguish between dlsw traffics then you will have to
use sap priority or local address priority.
This config above gives 50% to dlsw and 50% to all other traffic.
Peter
>From: Ayman Hamza <ayhamza@cisco.com>
>Reply-To: Ayman Hamza <ayhamza@cisco.com>
>To: Sam.MicroGate@usa.telekom.de, ccielab@groupstudy.com
>Subject: Heeelp!! Urgent !! CCIE question about CQ Date: Sun, 3 Nov 2002
>14:23:09 +0100 (CET)
>
>Team;
>
>Sorry for that high urgency. I have a question from a CCIE LAB exam which
>saying - exact wording - :
>
>-----------------------------------------------------------------
>
>On a router that you have DLSw+ config , configure CQ such that the
>DLSw+ traffic coming from ethernet interfaces to be allocated 50% of the
>outbound interface over which the DLSw+ session will be established.
>
>-----------------------------------------------------------------
>
>
>I don't really how to resolve this! If I configured queue-list for the
>traffic coming from ethernet interface that SNA/Netbios staions are
>setting,
>How I can specify in the queue-list command a definition that
>associates the DLSw+traffic and incoming interface traffic at teh sametime
>???!
>
>I mean:
>
>queue-list 1 interface ethernet0 1
>
>There is nothing in the above command that let me associates the traffic
>coming from ethernet0 with DLSW+, the above command gives a defintion for
>all the traffic coming from ethrnet 0 whether it's DLSw+ related or not!
>How
>I can solve this. More over, How I can specify the correct Byte counts!!!!!
>
>
>Appreciating any reply!
>
>
>Regards;
>Ayman
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:51 GMT-3