From: Tarun Pahuja (tpahuja@hotmail.com)
Date: Sun Nov 03 2002 - 01:28:33 GMT-3
Folks,
What is the best way to filter MPLS routes within the
provider core. I used Route-map under the BGP process, but, it does not
seem to work. Any suggestions would be highly appreciated.
router bgp 1
neighbor 10.10.1.1 remote-as 1
neighbor 10.10.1.1 update-source Loopback0
neighbor 10.10.1.1 route-map ddd in
!
address-family ipv4 vrf aaa
redistribute connected
redistribute rip metric 1
no auto-summary
no synchronization
aggregate-address 10.0.0.0 255.0.0.0
exit-address-family
!
address-family vpnv4
neighbor 10.10.1.1 activate
neighbor 10.10.1.1 send-community both
exit-address-family
Thanks,
Tarun
------------------------------------------------------------------------
Get a speedy connection with MSN Broadband. Join now! Click Here
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:51 GMT-3