From: Sara Li (saralilin@hotmail.com)
Date: Sat Nov 02 2002 - 13:08:37 GMT-3
Allen is right, check out this link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/wan_c/wcdatm.htm#xtocid8
>From: "McClure, Allen" >Reply-To: "McClure, Allen" >To: "Angelo De
Guzman" , >Subject: RE: ATM >Date: Fri, 1 Nov 2002 14:44:57 -0600 > >1.
Establish an ILMI PVC to the switch. >2. Run atm ilmi-pvc-discovery on
the atm interface >3. show atm pvc >4. map on the interface or use inarp
> >That's from brain to email, but I think it's about right. > >Allen
McClure >MCSE, CCNP, CCDP >YUM! Brands, Inc. >Sr. Network Analyst >NEW
E-Mail - mailto:allen.mcclure@yum.com >972-338-7494 > > >-----Original
Message----- >From: Angelo De Guzman [mailto:ghie_pogi@yahoo.com] >Sent:
Friday, November 01, 2002 6:35 AM >To: ccielab@groupstudy.com >Subject:
ATM > > >Hi, > I'm trying to this. > >ATM Configuration: >Configure R7
using the following information so you >can connect to the router in the
ATM cloud. >- You must discover your VPI/VCI pair, and then >manually
configure them in your configuration. >- Configure the ATM interface IP
address to have its >last octet equal to the pod #. >- You may not use
map-lists in your ATM configuration. > >I can't make this work. I really
don't have an idea >how to make this work. Any idea on what is the other
>side of this ATM connection? > > >My config: > >interface ATM1/0 >no ip
add >atm ilmi-keepalive >atm ilmi-pvc-discovery >pvc 0 0/16 ilmi >!
>R7#sh atm ilmi-status >Interface : ATM1/0 Interface Type : Private UNI
>(User-side) >ILMI VCC : (0, 16) ILMI Keepalive : Disabled >ILMI State:
UpAndNormal >Peer IP Addr: 0.0.0.0 Peer IF Name: >ATM0/0/0 >Peer
MaxVPIbits: 8 Peer MaxVCIbits: 14 >Active Prefix(s) :
>47.0091.8100.0000.0031.8019.2d01 >R7# > >Thanks, >Angelo > >
>__________________________________________________ >Do You Yahoo!?
>Yahoo! Autos - Get free new car price quotes http://autos.yahoo.com > >
>This communication is confidential and may be legally privileged. If you
are not the intended recipient, (i) please do not read or disclose to
others, (ii) please notify the sender by reply mail, and (iii) please
delete this communication from your system. Failure to follow this
process may be unlawful. Thank you for your cooperation.
------------------------------------------------------------------------
Broadband? Dial-up? Get reliable MSN Internet Access. Click Here
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:51 GMT-3