From: eric (namaste@pacbell.net)
Date: Fri Nov 01 2002 - 00:40:28 GMT-3
Look at the interface timers that may lead you to finding the another
answer.
regards,
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Benny Chong
Sent: Thursday, October 31, 2002 2:16 PM
To: ccielab@groupstudy.com
Subject: OSPF neighbor between point-to-point subinterface and Natural
interface
Hi expert,
A simple question:
2 routers connect over Frame Relay, R1 use point-to-point subinterface (s0.1
point-to-point), R2 use the natural interface (s0). They run OSPF.
My question is, beside using 'ip ospf network point-to-point' on R2 s0 in
order for R1 and R2 to form neighbor, is there any other method?
I try to use 'neighbor' command on R2, but it doesn't work. So is changing
the network type the only solution?
Thanks!
Benny
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:50 GMT-3