From: Brian McGahan (brian@cyscoexpert.com)
Date: Tue Oct 29 2002 - 23:41:33 GMT-3
Deepesh,
For PPP callback on dialer profiles, apply the callback class to
the dialer string.
interface Dialer0
dialer pool 1
dialer string 1234567 class CALLBACK
end
!
Router#sh run map-class
Current configuration:
!
map-class dialer CALLBACK
dialer callback-server username
The best source of information for these types of configurations is the
access dial cookbook.
http://www.cisco.com/warp/public/793/access_dial/
Here's one on caller-id callback with dialer profiles:
http://www.cisco.com/warp/public/793/access_dial/Isdn_callerID.html
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Deepesh Chouhan
> Sent: Tuesday, October 29, 2002 7:09 PM
> To: group study
> Subject: Config callpack on dialer profiles
>
> Hi
>
> Does anyone have any config for ppp callback on Dialer profiles.
> The problem i'm facing is that there is no dialer map statement on
> interface
> dialer config. Thus when the request for callback comes in from
client,
> server doesn't know which string to dial.
> It can't find remote hostname, as their is no dialer map ip x.x.x.x
name
> remote_name
>
> Doc CD and solie have e.g. for legacy DDR only
>
> Is there any other way to do it ?
> I tried using ppp caller ..... but in that case i get
> "not able to bind" error
>
> thanks
> deepesh
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:59 GMT-3