From: Foster, Alexander (afoster@cnr.edu)
Date: Tue Oct 29 2002 - 12:17:05 GMT-3
You should try to assign the ports to the correct vlans first...then
enable port security
-----Original Message-----
From: Raymond Mak [mailto:maksir919@yahoo.com]
Sent: Monday, October 28, 2002 3:05 AM
To: ccielab@groupstudy.com
Subject: 3550 port security problem
Hi all,
I have a problem regarding 3550 port security.
When I enable it, it is fine with configuration and test it
is ok; but once I change the default VLAN 1 to 2 or others
on the port, it is psecure-violation. And I find in the
debug log, it is psecure-violation and vlanid=2 etc.
I would like to know can I assign the port in different
vlan when port security is enabled? If so, how can I do it? Thanks a
lot.
Raymond
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:58 GMT-3