From: Tim Medley (tim.medley@ireadyworld.com)
Date: Sun Oct 27 2002 - 21:03:27 GMT-3
You have to have the correct cable attached and then ensure that the
jumper is set correctly. Also only certain physical serial interface
types on the AGS+ routers support DTE.
tm
Tim Medley, CCNP+Voice, CCDP, CWNA
Sr. Network Architect
VoIP Group
iReadyWorld
-----Original Message-----
From: Peng Zheng [mailto:zpnist@yahoo.com]
Sent: Sunday, October 27, 2002 1:07 PM
To: ccielab@groupstudy.com
Subject: Setting clock rate for DTE's is not allowed
When I set up the clock rate for AGS router ( I want
it to be a frame-relay switch), after I set up:
no ip address
encapsulation frame-relay
frame-relay lmi-type ansi
frame-relay intf-type dce
I type :
clock rate 64000, then I got:
Setting clock rate for DTE's is not allowed
Does anyone know what't the problem?
Thank you for help.
Best Wishes,
Peng Zheng
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:57 GMT-3