From: Peng Zheng (zpnist@yahoo.com)
Date: Sun Oct 27 2002 - 20:30:58 GMT-3
Is it necesary to connect the cable before I set up?
I can set up a 2520 as frame-relay switch and with
clock rate without a cable.
--- Kip Palmer <RES176RR@verizon.net> wrote:
> Not to patronize, but you did key:
>
> Router#(config)>frame-relay switching
>
> ...in global config mode?
>
> kpalmer
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Peng Zheng
> Sent: Sunday, October 27, 2002 10:07 AM
> To: ccielab@groupstudy.com
> Subject: Setting clock rate for DTE's is not allowed
>
> When I set up the clock rate for AGS router ( I want
> it to be a frame-relay switch), after I set up:
>
> no ip address
> encapsulation frame-relay
> frame-relay lmi-type ansi
> frame-relay intf-type dce
>
> I type :
> clock rate 64000, then I got:
> Setting clock rate for DTE's is not allowed
>
> Does anyone know what't the problem?
>
> Thank you for help.
>
> Best Wishes,
> Peng Zheng
>
> __________________________________________________
> Do you Yahoo!?
> Y! Web Hosting - Let the expert host your web site
> http://webhosting.yahoo.com/
>
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:57 GMT-3