From: ccie@dg4acr.org
Date: Sun Oct 27 2002 - 15:19:49 GMT-3
Hi,
there are Jumpers on the Interface Cards you have to set them to DCE
Search the Doc CD with the following keywords
AGS Hardware Installation
If u set them it will work fine
cu
Knut
Peng Zheng <zpnist@yahoo.com> schrieb am 27.10.2002, 19:06:50:
> When I set up the clock rate for AGS router ( I want
> it to be a frame-relay switch), after I set up:
>
> no ip address
> encapsulation frame-relay
> frame-relay lmi-type ansi
> frame-relay intf-type dce
>
> I type :
> clock rate 64000, then I got:
> Setting clock rate for DTE's is not allowed
>
> Does anyone know what't the problem?
>
> Thank you for help.
>
> Best Wishes,
> Peng Zheng
>
> __________________________________________________
> Do you Yahoo!?
> Y! Web Hosting - Let the expert host your web site
> http://webhosting.yahoo.com/
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:57 GMT-3