From: chad (chad@chadreid.com)
Date: Sun Oct 27 2002 - 15:29:23 GMT-3
Hi Peng,
I think you may be plugging the DTE end of the cable into the serial port
that you want to be the DCE. Double check the cable and make sure you have
the right end plugged in.
Chad
----- Original Message -----
From: "Peng Zheng" <zpnist@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, October 27, 2002 1:06 PM
Subject: Setting clock rate for DTE's is not allowed
> When I set up the clock rate for AGS router ( I want
> it to be a frame-relay switch), after I set up:
>
> no ip address
> encapsulation frame-relay
> frame-relay lmi-type ansi
> frame-relay intf-type dce
>
> I type :
> clock rate 64000, then I got:
> Setting clock rate for DTE's is not allowed
>
> Does anyone know what't the problem?
>
> Thank you for help.
>
> Best Wishes,
> Peng Zheng
>
> __________________________________________________
> Do you Yahoo!?
> Y! Web Hosting - Let the expert host your web site
> http://webhosting.yahoo.com/
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:57 GMT-3