Re: Etherchannel with Router on a Stick

From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Thu Oct 24 2002 - 16:18:08 GMT-3

• Next message: Dotun Oni: "RE: IP split-horizon & OSPF"
• Previous message: Brian Dennis: "RE: Ccielab you have an E-Card from ."
• Maybe in reply to: Christopher M. Heffner: "Etherchannel with Router on a Stick"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

No, it does not.
Etherchannel is supported starting at 7200 and up.
I was digging this a couple of days ago on CCO and
found a table with routers supporting etherchannel and/or 802.1q.
See:
http://www.cisco.com/warp/public/473/158.html

Christopher M. Heffner wrote:
> Does anyone know if Cisco supports Etherchannel on a 3640 series router?
>
> I have found the interface port-channel command on the 7200 series
> router but want to be able to setup etherchannel to a 3620 and/or 3640
> router.
>
> Any help would be greatly appreciated.
>
> Thanks in advance.
>
> Christopher M. Heffner, CCIE, CCSI
> Strategic Network Solutions, Inc.
> cheffner@certified-labs.net
>

-- 
Carlos G Mendioroz  <tron@huapi.ba.ar>  LW7 EQI  Argentina

• Next message: Dotun Oni: "RE: IP split-horizon & OSPF"
• Previous message: Brian Dennis: "RE: Ccielab you have an E-Card from ."
• Maybe in reply to: Christopher M. Heffner: "Etherchannel with Router on a Stick"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:56 GMT-3