EIGRP Distance

From: Hung, Sing-Yu (Sing-Yu.Hung@pccw.com)
Date: Thu Oct 24 2002 - 13:13:15 GMT-3

• Next message: Volkov, Dmitry (Toronto - BCE): "RE: access-list switching"
• Previous message: Brian Dennis: "RE: IP split-horizon & OSPF"
• Next in thread: Adam Crisp: "RE: EIGRP Distance"
• Maybe reply: Adam Crisp: "RE: EIGRP Distance"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Dear,
        How can I set distance in EIGRP, because I can't get success by
below command

r6#sh run | beg router ei
router eigrp 146
 redistribute ospf 100 metric 1544 600 125 125 1500
 redistribute igrp 68 metric 1544 600 125 125 1500
 passive-interface default
 no passive-interface Serial0.1
 network 172.16.146.0 0.0.0.15
 distance 99 172.16.14.0 0.0.0.255
 distance 255 0.0.0.0 0.0.0.0
 no auto-summary
 eigrp log-neighbor-changes

r6#r ei
     172.16.0.0/16 is variably subnetted, 24 subnets, 6 masks
D 172.16.14.0/24 [90/2297856] via 172.16.146.14, 00:03:53, Serial0.1

Bradford Hung

 Pacific Century CyberWorks
 Tel: 288 33125

• Next message: Volkov, Dmitry (Toronto - BCE): "RE: access-list switching"
• Previous message: Brian Dennis: "RE: IP split-horizon & OSPF"
• Next in thread: Adam Crisp: "RE: EIGRP Distance"
• Maybe reply: Adam Crisp: "RE: EIGRP Distance"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:56 GMT-3