From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Thu Oct 24 2002 - 00:24:01 GMT-3
when you define the hub router sub interface.
use a multipoint for the hub
int s0.1 multipoint
see how it goes from there.
Donny
aansar@sscomp.com
.sg To: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
cc: ccielab@groupstudy.com, nobody@groupstudy.com
24-10-2002 10:37 Subject: Re: Adv Router is not-reachable
condition is like this
do not use ip ospf network command when configuring the OSPF
use only subinterface in the hub router not in the spoke routers
****************************************************************************
Message from:
A.S Ahmed Ansar
Customer Support Group
Seven Seas Computers.com (Singapore) Pte LTD
email: aansar@sscomp.com.sg
Tel:+65 551 5726 or Mobile: +65 9012 2488
Fax:+65 5515 755
visit us at http://www.sscomp.com.sg
***************************************************************************
"Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
Sent by: nobody@groupstudy.com
10/24/2002 10:19 AM
Please respond to "Donny MATEO"
To: aansar@sscomp.com.sg
cc: ccielab@groupstudy.com, nobody@groupstudy.com
Subject: Re: Adv Router is not-reachable
on which router are you prohibited to use ip ospf network x.x.x.x. ? And
what is the wording. If it
specified only one router you can use it on the other router. Or if it's
just say don't use ip ospf
network broadcast, you can always use ip ospf network point-to-multipoint.
Donny
aansar@sscomp.com
.sg To: ccielab@groupstudy.com
Sent by: cc:
nobody@groupstudy Subject: Adv Router is
not-reachable
.com
24-10-2002 09:01
Please respond to
aansar
sh ip os data router , shows
Adv Router is not-reachable
but adjutancy has been established already .. what could be the problem.
R1
has point to point frame relay interface towards R2
R2
normal plain serial interface (initially hello mis matches , i changed
hello interval of R2 )
Adancy has been estabilised , no problem
but R2 routes are not visible in R1, (sh ip os data router , shows all the
LSA of R2 but the first line tells adv router is not reachable)
Adv Router is not-reachable
LS age: 1625
Options: (No TOS-capability, DC)
LS Type: Router Links
Link State ID: 7.7.7.7
Advertising Router: 7.7.7.7
LS Seq Number: 80000005
Checksum: 0xF048
Length: 156
Number of Links: 11
thanks
aa
(See attached file: C.htm)
condition is like this
do not use ip ospf network command when configuring the OSPF
use only subinterface in the hub router not in the spoke routers
****************************************************************************
Message from:
A.S Ahmed Ansar
Customer Support Group
Seven Seas Computers.com (Singapore) Pte LTD
email: aansar@sscomp.com.sg
Tel:+65 551 5726 or Mobile: +65 9012 2488
Fax:+65 5515 755
visit us at http://www.sscomp.com.sg
***************************************************************************
[TABLE NOT SHOWN]
on which router are you prohibited to use ip ospf network x.x.x.x. ? And
what is the wording. If it
specified only one router you can use it on the other router. Or if it's
just say don't use ip ospf
network broadcast, you can always use ip ospf network
point-to-multipoint.
Donny
aansar@sscomp.com
.sg To:
ccielab@groupstudy.com
Sent by: cc:
nobody@groupstudy Subject: Adv Router is
not-reachable
.com
24-10-2002 09:01
Please respond to
aansar
sh ip os data router , shows
Adv Router is not-reachable
but adjutancy has been established already .. what could be the problem.
R1
has point to point frame relay interface towards R2
R2
normal plain serial interface (initially hello mis matches , i changed
hello interval of R2 )
Adancy has been estabilised , no problem
but R2 routes are not visible in R1, (sh ip os data router , shows all
the
LSA of R2 but the first line tells adv router is not reachable)
Adv Router is not-reachable
LS age: 1625
Options: (No TOS-capability, DC)
LS Type: Router Links
Link State ID: 7.7.7.7
Advertising Router: 7.7.7.7
LS Seq Number: 80000005
Checksum: 0xF048
Length: 156
Number of Links: 11
thanks
aa
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:55 GMT-3