From: Kris Keen (kkeen@bigpond.net.au)
Date: Wed Oct 23 2002 - 21:38:22 GMT-3
Further to this
Ive removed the dialer strings, and replaced them with Maps. R4 maps to .2
using R6 as name
and vise versa!
----- Original Message -----
From: "Kris Keen" <kkeen@bigpond.net.au>
To: "CCIE" <ccielab@groupstudy.com>
Sent: Thursday, October 24, 2002 9:59 AM
Subject: ISDN & PAP
> Hi All
>
> this is crazy! After working 10hours, it could be me but take a look
>
> R4 is the CALLING Router
> R6 is the CALLED Router
>
> Configs are:
>
>
> R4#sh run
> Building configuration...
> service password-encryption
> !
> hostname R4
> !
> username R6 password 7 112A3036343D
>
> interface BRI0
> ip address 172.20.16.1 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 50000
> dialer string 1111
> dialer-group 1
> isdn switch-type basic-net3
> ppp authentication pap
> ppp pap sent-username R4 password 7 1531223F2705
> !
> dialer-list 1 protocol ip permit
> end
>
> R4#
>
>
> ****************************************
> ****************************************
> ****************************************
>
>
> R6#sh run
> service password-encryption
> hostname R6
> !
> username R4 password 7 072C087F6D26
> ip subnet-zero
>
> interface BRI0
> ip address 172.20.16.2 255.255.255.0
> encapsulation ppp
> dialer-group 1
> isdn switch-type basic-net3
> ppp authentication pap
> ppp pap sent-username R6 password 7 05282F3C0263
> !
> dialer-list 1 protocol ip permit
>
>
> R6#
>
>
>
>
> Debug on CALLING shows Username R4 not found, auth Failure....
>
> Ideas? ive got no clue. Configured like Solie
>
> Cheers
> KK
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:55 GMT-3