From: Mingzhou Nie (mnie@yahoo.com)
Date: Wed Oct 23 2002 - 21:22:03 GMT-3
Sam,
The most easiest way I can think of is to make both sides of the cable
duplex mismatch. To simulate traps, you can enable either
linkup/linkdown trap, if you have more than one interfaces to test, or
syslog trap so that for each syslog message generated a trap will also
be sent.
Ming
--- Sam Munzani <sam@zealtron.com> wrote:
> Group,
>
> This is an out of topic item.
>
> I am testing some snmp scripts to watch CRC errors on serial
> interface. What's
> best way to simulate CRC errors on a circuit?(Other than configuring
> wrong
> Framing Type).
>
> also, I need to test my trap daemon for Envorinmental events. Any
> easy way to
> generate those events?
> e.g. high temp events without putting router on a grill, Voltage
> events
> without short circuiting,
>
> Any help would be greately appreciated.
>
> Thanks,
> Sam
=====
Mingzhou Nie, CCIE #10342
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:55 GMT-3