From: Yasir Zaman (yasirzaman2001@mail.com)
Date: Wed Oct 23 2002 - 07:41:09 GMT-3
By Default OSPF does not redistribute the Default Route into OSPF.You use the Default-Information Originate Command under the Routing Process and it would Work.
Yasir
----- Original Message -----
From: "Sage the IP Monkey" <the_ip_monkey_goes_bananas@hotmail.com>
Date: Sat, 19 Oct 2002 10:30:27 +1000
To: <ccielab@groupstudy.com>
Subject: Redistribute static in OSPF
Dear all,
Have a weird issue with redistribute static in OSPF.
Router3-------------------Router4
Point to point serial interfaces, encap ppp,
clock rate 5600. Int's are UP/UP.
Router3 IP = 173.168.40.1
Router4 IP = 173.168.40.2
They have default static's pointing to each other -
ip route 0.0.0.0 0.0.0.0 x.x.x.x
Under the OSPF process I configured:
redistribute static metric 500 metric-type 1
Output of show ip route on Router3:
Gateway of last resort is 173.168.40.2 to network 0.0.0.0
173.168.0.0/24 is subnetted, 1 subnets
C 173.168.40.0 is directly connected, Serial1
S* 0.0.0.0/0 [1/0] via 173.168.40.2
But whe I issue a - show ip ospf data/show ip route ospf
the network is not there. Q) What am I missing here?
I got this config to work before, but now am not sure what
I have messed up with.
If you need more outputs/info email me.
rgds,
Sage
--
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:54 GMT-3