From: Bill jegcitroen (jegcitroen@hotmail.com)
Date: Wed Oct 23 2002 - 05:36:46 GMT-3
Hi Donny,
IMO, Distribute-list DOES work for OSPF in some situation.
"distribute-list # in" or "distribute-list # in interface" will filter
routes
into routing table;
"distribute-list # out routing process" will filter the redistribution
routes.
Fan Shan, frankly speaking, distribute-list out means nothing for ospf,
since it is LS routing protocol.
-jegcitroen
----- Original Message -----
From: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
To: "Fan Shan" <fansh@publicf.bta.net.cn>
Cc: "Ccielab@Groupstudy.Com" <ccielab@groupstudy.com>;
<nobody@groupstudy.com>
Sent: Wednesday, October 23, 2002 2:13 PM
Subject: Re: How to understand this distribution list?
>frankly speaking,
>nothing. Distribute-list don't work for OSPF. OSPF use LSA as oppose to
>distance vector routing
>protocol such as RIP, IGRP and EIGRP.
>
>Donny
>
>
>
>
> "Fan Shan"
>
><fansh@publicf.bt To: "Ccielab@Groupstudy.Com"
><ccielab@groupstudy.com>
>a.net.cn> cc:
> Sent by:
> Subject: How to understand this distribution list?
> nobody@groupstudy
>
> .com
>
>
>
>
> 23-10-2002
>13:31
> Please respond to
>
> "Fan Shan"
>
>
>
>
>router ospf 1
>distribution-list 3 out
>
>access-list 3 deny 192.168.1.0 0.0.254.255
>access-list 3 permit any
>
>
>What will it do?
>How can it advertise only even route like 192.168.2.0, 192.168.4.0,...
>
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:54 GMT-3