From: Frank Jimenez (franjime@cisco.com)
Date: Tue Oct 22 2002 - 09:53:57 GMT-3
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configurat
ion_example09186a0080094852.shtml
Gives a detailed example of how to accomplish this. Also note the H225
timer that needs to be reduced in order to properly set up the calls in
this scenario
Frank Jimenez, CCIE #5738
franjime@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Prio Utomo
Sent: Tuesday, October 22, 2002 5:30 AM
To: ccielab@groupstudy.com
Subject: Redundancy in Dial Peer
Dear Experts,
How can I make redundancy in dial peer..... so when certain session
target ip address is not available in the routing table..... it can
point to another ip address?
Can I use 2 different dial peer <num> voip with the same destination
pattern but different session target ip address?
regards,
PU
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:53 GMT-3