From: Azhar Mehmood (azhar.mehmood@web.de)
Date: Mon Oct 21 2002 - 19:15:50 GMT-3
Hi,
scenario:
\ /
AS2010 \ / AS2001
R7-----------------------R2-----------------R1-----------------R3
/ \
/ \
IGP:
- between R7 and R2 IGP is RIP v2
- R2,R1 & R3 running OSPF
- routes fron RIP redistributed in OSPF and v/v
- full connectivity is established (every router can reach each network in bot ASs via its IGP)
BGP:
- EBGP between R7 & R2, IBGP R2,R1 & R3 (partial mesh: R2-->R1--->R3)
- R1 is Route-Reflector for R2 & R3
Problem:
- routes learned via bgp on R1 are marked as valid and best (*>) but same routes when reflected to R3 are although marked as valid but not best. Detailed view of a prefix learned via R1 shows that prefixes are not synched for some reason (enabling "no synch" command proves that). IGP Routes in both router's routing table are same.
So now the 1 Mio. $ Question: What is causing BGP prefixes on R3 no to be synchronized, despite having routes in routing table toward nexthop and same prefixes learned via IGP.
As far I understood the "Synch rule" was that it states that, prfixes learned via IBGP should be present in routing table learned via an IGP to avoid blackholing traffic and mark prefixes as best to propogate them further. is that right?
regards
Azhar M.
PS: configs are available OD.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:53 GMT-3