From: Nathan Chessin (nchessin@cisco.com)
Date: Mon Oct 21 2002 - 02:06:41 GMT-3
ummm... ooops. I should have read the question more carefully, sorry.
> -----Original Message-----
> From: Jason Sinclair [mailto:sinclairj@powertel.com.au]
> Sent: Sunday, October 20, 2002 10:08 PM
> To: 'Nathan Chessin'
> Subject: RE: telnet source address
>
>
> Nathan,
>
> That is using PING I agree - however he was after a way to
> telnet using a
> source address of a secondary interface. You can use the
> /source-interface
> switch but this does not allow you to choose a specific address on an
> interface - it will use the primary address.
>
> Regards,
>
> Jason Sinclair CCIE #9100
> Manager, Network Control Centre
> POWERTEL
> 55 Clarence Street,
> SYDNEY NSW 2000
> AUSTRALIA
> office: + 61 2 8264 3820
> mobile: + 61 416 105 858
> email: sinclairj@powertel.com.au
>
> -----Original Message-----
> From: Nathan Chessin [mailto:nchessin@cisco.com]
> Sent: Monday, 21 October 2002 15:03
> To: 'Jason Sinclair'
> Subject: RE: telnet source address
>
> type ping and hit return. Go through the commands, and when
> it asks you to
> use extended commands, type yes, and then you can source your
> ping from a
> particular ip address.
>
> Nate
>
> > -----Original Message-----
> > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> > Jason Sinclair
> > Sent: Sunday, October 20, 2002 8:42 PM
> > To: 'Ron'; Bill jegcitroen; ccielab@groupstudy.com
> > Subject: RE: telnet source address
> >
> >
> > The problem still remains of how to specify which address on
> > the int to
> > use.........
> >
> > Jason Sinclair CCIE #9100
> > Manager, Network Control Centre
> > POWERTEL
> > 55 Clarence Street,
> > SYDNEY NSW 2000
> > AUSTRALIA
> > office: + 61 2 8264 3820
> > mobile: + 61 416 105 858
> > email: sinclairj@powertel.com.au
> >
> > -----Original Message-----
> > From: Ron [mailto:id353@singnet.com.sg]
> > Sent: Monday, 21 October 2002 13:01
> > To: Bill jegcitroen; ccielab@groupstudy.com
> > Subject: Re: telnet source address
> >
> > ip telnet source-interface
> >
> > Allows a user to select an address of an interface as the
> > source address for
> > Telnet connections.
> >
> > Ron
> >
> > >From Bill jegcitroen <jegcitroen@hotmail.com> on 20 Oct 2002:
> >
> > > Hi Guys,
> > >
> > > How can I telnet to a host using the secondary address of
> > an interface
> > > instead of the primary ip address?
> > >
> > > Thanx in advance
> > >
> > > - Jegcitroen
> > >
> > >
> > >
> > > _________________________________________________________________
> > > Broadband? Dial-up? Get reliable MSN Internet Access.
> > > http://resourcecenter.msn.com/access/plans/default.asp
> >
> >
> >
> **********************************************************************
> > PowerTel Limited, winners of
> > Best Corporate/Wholesale Broadband Initiative, Australian
> > Telecom Awards 2002
> > Broadband Wholesale Carrier of the year, CommsWorld Telecomms
> > Awards 2001
> > Best Emerging Telco, Australian Telecom Awards 2001
> >
> >
> **********************************************************************
> > This email (including all attachments) is intended solely for
> > the named
> > addressee. It is confidential and may contain commercially sensitive
> > information. If you receive it in error, please let us know
> > by reply email,
> > delete it from your system and destroy any copies.
> >
> > This email is also subject to copyright. No part of it should
> > be reproduced,
> > adapted or transmitted without the prior written consent of
> > the copyright owner.
> >
> > Emails may be interfered with, may contain computer viruses
> > or other defects
> > and may not be successfully replicated on other systems. We give no
> > warranties in relation to these matters. If you have any
> doubts about
> > the authenticity of an email purportedly sent by us, please
> contact us
> > immediately.
> >
> >
> **********************************************************************
> >
>
>
> **********************************************************************
> PowerTel Limited, winners of
> Best Corporate/Wholesale Broadband Initiative, Australian
> Telecom Awards 2002
> Broadband Wholesale Carrier of the year, CommsWorld Telecomms
> Awards 2001
> Best Emerging Telco, Australian Telecom Awards 2001
>
> **********************************************************************
> This email (including all attachments) is intended solely for
> the named
> addressee. It is confidential and may contain commercially sensitive
> information. If you receive it in error, please let us know
> by reply email,
> delete it from your system and destroy any copies.
>
> This email is also subject to copyright. No part of it should
> be reproduced,
> adapted or transmitted without the prior written consent of
> the copyright owner.
>
> Emails may be interfered with, may contain computer viruses
> or other defects
> and may not be successfully replicated on other systems. We give no
> warranties in relation to these matters. If you have any doubts about
> the authenticity of an email purportedly sent by us, please contact us
> immediately.
>
> **********************************************************************
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:52 GMT-3