From: Chris (clarson52@comcast.net)
Date: Sat Oct 19 2002 - 16:28:47 GMT-3
I believe that if you do secondary addresses in OSPF they must be in the
same area as the primary. I am fairly certain about this but cannot find the
doc from Cisco where I read it.
----- Original Message -----
From: "LoizosCisco" <david_steven2001@yahoo.com>
To: "chenyan" <chenyan@deeptht.com.cn>; "ccielab" <ccielab@groupstudy.com>
Sent: Saturday, October 19, 2002 2:07 PM
Subject: Re: ospf secondary
> Chenyan,
>
> Is it possible to post the config here so we can take
> a look? If you will turn off the hello advertisement
> why don't you just remove the network statement with
> the secondary subnet from OSPF? What are you trying to
> accomplish?
>
>
>
>
>
> --- chenyan <chenyan@deeptht.com.cn> wrote:
> > hi,group
> >
> > only one phycial ethernet interface with two ip add,
> > one for main and the other for secondary, both are
> > configured as two sepreate AREA, but there still
> > mismatch area notification sent, so I want to turn
> > off the hello advertied by then secondary, HOW?
> >
> > Thanks
>
>
> __________________________________________________
> Do you Yahoo!?
> Y! Web Hosting - Let the expert host your web site
> http://webhosting.yahoo.com/
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:51 GMT-3