From: Sam Munzani (sam@zealtron.com)
Date: Fri Oct 18 2002 - 11:32:56 GMT-3
Peter,
After I posted on group, I found a good CCO document explaining all about it. Also, you need to disable keepalive on physical interface(This will disable LMI).
Now another twist to the question,
If I have 2 T1 back-to-back links, what's better bundling option? Multilink PPP or FRF.16(With back to back Frame Relay)? So far FRF.16 looks more locrative option.
Sam
>
> Sam,
>
> Yes, you can do back to back F/R. You just need to map to the same DLCI on
> both sides or if you are using subinterfaces do frame-relay interface-dlci
> with the same DLCI.
>
> __________________________
> Peter Puczko
> #7247 (R&S, Security)
> Phone (847) 674-3392
>
> ----- Original Message -----
> From: "Sam Munzani" <sam@zealtron.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, October 17, 2002 4:16 PM
> Subject: Frame Relay back-to-back on T1 CSU/DSU module
>
>
> > Hi,
> >
> > How can you do Frame Relay encapsulation back to back with 2 routers(T1
> > CSU/DSU modules with T1 cross over cable)?
> >
> > Any suggestions? I want to do 2 circuits just like this and bundle them
> using
> > FRF.16
> >
> > Thanks,
> > Sam Munzani
> > CCIE # 6479 (R&S)
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:50 GMT-3