From: aansar@sscomp.com.sg
Date: Thu Oct 17 2002 - 10:56:12 GMT-3
but i am not able to key in sub interface there.. it takes only major
interface. ?
anthony ohanusi
<ohanusi@lagos.sn To: aansar@sscomp.com.sg, Benny Chong <c_benny@hotmail.com>,
s.slb.com> ccielab@groupstudy.com
cc:
17-10-02 05:55 PM Subject: Re: VoFR example in Solie book... can't make it work.
At 02:41 AM 10/17/2002, aansar@sscomp.com.sg wrote:
it didnt worked for me also.
i moved to read again from different sources , instead of karl solie..
i
will let u know if its work
Hi
Your session target should be session target Serial0/0.1 111 ( I think is
a mistake in the book ) ( they forgot to add the sub interface 0.1)
Regards
"Benny Chong"
<c_benny@hotm To:
ccielab@groupstudy.com
ail.com> cc:
Sent by: Subject: VoFR example in
Solie book... can't make it work.
nobody@groups
tudy.com
17-10-02
05:51 AM
Please
respond to
"Benny Chong"
Hi,
I am testing VoFR, and use the same configuration as the example on
page
423-431 of Solie's Practical Studies book. (besides using different
Serial
interface, DLCI etc. to fit my equipment.) Below are the config and
the
'csim' test... can someone find anything wrong? Thanks very much.
By the way, I am a little bit confuse. Can someone explain what is
the
difference between VoFR and VoIP across a Frame Relay network? How do
I
decide when should I use VoFR and when should I use VoIP arcoss a FR?
r13#
r13#csim start 1414
csim: called number = 1414, loop count = 1 ping count = 0
csim err csimDisconnected recvd DISC cid(5)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
***************************************************
Router 13 config:
!
voice-port 3/0/0
!
voice-port 3/0/1
!
!
dial-peer voice 13 pots
destination-pattern 1313
port 3/0/0
!
dial-peer voice 1414 vofr
destination-pattern 1414
session target Serial0/0 111
!
!
interface Serial0/0
no ip address
encapsulation frame-relay
frame-relay traffic-shaping
!
interface Serial0/0.1 point-to-point
ip address 100.100.100.1 255.255.255.0
frame-relay interface-dlci 111
class voice
vofr cisco
!
!
map-class frame-relay voice
frame-relay cir 768000
frame-relay bc 1000
frame-relay mincir 120000
no frame-relay adaptive-shaping
frame-relay fair-queue
frame-relay voice bandwidth 78000
frame-relay fragment 1500
**************************************************************
Router 14 config:
!
voice-port 3/0/0
!
voice-port 3/0/1
!
!
dial-peer voice 14 pots
destination-pattern 1414
port 3/0/0
!
dial-peer voice 1313 vofr
destination-pattern 1313
session target Serial0/0 112
!
!
interface Serial0/0
no ip address
encapsulation frame-relay
frame-relay traffic-shaping
!
interface Serial0/0.1 point-to-point
ip address 100.100.100.2 255.255.255.0
frame-relay interface-dlci 112
class voice
vofr cisco
!
map-class frame-relay voice
frame-relay cir 768000
frame-relay bc 1000
frame-relay mincir 120000
no frame-relay adaptive-shaping
frame-relay fair-queue
frame-relay voice bandwidth 78000
frame-relay fragment 1500
!
line con 0
line aux 0
line vty 0 4
!
end
_________________________________________________________________
Choose an Internet access plan right for you -- try MSN!
http://resourcecenter.msn.com/access/plans/default.asp
Sema UKI Phase II Integration Team
Schlumberger Network & Infrastructure Solutions
Ohanusi Anthony
Technical Consulting
Schlumberger Network Solution
South Quay Plaza 11
138 Marsh Wall
LONDON E149SH
Tel : +44(0)2075172628
Main: +44(0)207514000
Fax: +44(0)207514002
Mail-ohanusi2000@yahoo.com
CONFIDENTIAL & PRIVILEGED COMMUNICATION
The information contained in this message is privileged, confidential,
and protected from disclosure. This message is intended for the
individual or entity addressed herein. If you are not the intended
recipient, please do not read, copy, use or disclose this
communication to others; also please notify the sender by replying to
this message, and then delete it from your system. The sender totally
disclaims, and will not accept, any responsibility or liability for
the unauthorized use, or the consequences of any unauthorized use, of
this communication or message. Thank you
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:49 GMT-3