From: anthony ohanusi (ohanusi@lagos.sns.slb.com)
Date: Thu Oct 17 2002 - 06:55:29 GMT-3
At 02:41 AM 10/17/2002, aansar@sscomp.com.sg wrote:
>it didnt worked for me also.
>i moved to read again from different sources , instead of karl solie.. i
>will let u know if its work
Hi
Your session target should be session target Serial0/0.1 111 ( I think is
a mistake in the book ) ( they forgot to add the sub interface 0.1)
Regards
>
>
> "Benny
> Chong"
>
> <c_benny@hotm To: ccielab@groupstudy.com
>
> ail.com> cc:
>
> Sent by: Subject: VoFR example in
> Solie book... can't make it work.
> nobody@groups
>
> tudy.com
>
>
>
>
>
> 17-10-02
>
> 05:51
> AM
>
> Please
>
> respond
> to
>
> "Benny
> Chong"
>
>
>
>
>
>
>
>
>
>Hi,
>
>I am testing VoFR, and use the same configuration as the example on page
>423-431 of Solie's Practical Studies book. (besides using different Serial
>interface, DLCI etc. to fit my equipment.) Below are the config and the
>'csim' test... can someone find anything wrong? Thanks very much.
>
>By the way, I am a little bit confuse. Can someone explain what is the
>difference between VoFR and VoIP across a Frame Relay network? How do I
>decide when should I use VoFR and when should I use VoIP arcoss a FR?
>
>r13#
>r13#csim start 1414
>csim: called number = 1414, loop count = 1 ping count = 0
>
>csim err csimDisconnected recvd DISC cid(5)
>csim: loop = 1, failed = 1
>csim: call attempted = 1, setup failed = 1, tone failed = 0
>
>***************************************************
>
>Router 13 config:
>!
>voice-port 3/0/0
>!
>voice-port 3/0/1
>!
>!
>dial-peer voice 13 pots
>destination-pattern 1313
>port 3/0/0
>!
>dial-peer voice 1414 vofr
>destination-pattern 1414
>session target Serial0/0 111
>!
>!
>interface Serial0/0
>no ip address
>encapsulation frame-relay
>frame-relay traffic-shaping
>!
>interface Serial0/0.1 point-to-point
>ip address 100.100.100.1 255.255.255.0
>frame-relay interface-dlci 111
> class voice
> vofr cisco
>!
>!
>map-class frame-relay voice
>frame-relay cir 768000
>frame-relay bc 1000
>frame-relay mincir 120000
>no frame-relay adaptive-shaping
>frame-relay fair-queue
>frame-relay voice bandwidth 78000
>frame-relay fragment 1500
>
>**************************************************************
>
>Router 14 config:
>!
>voice-port 3/0/0
>!
>voice-port 3/0/1
>!
>!
>dial-peer voice 14 pots
>destination-pattern 1414
>port 3/0/0
>!
>dial-peer voice 1313 vofr
>destination-pattern 1313
>session target Serial0/0 112
>!
>!
>interface Serial0/0
>no ip address
>encapsulation frame-relay
>frame-relay traffic-shaping
>!
>interface Serial0/0.1 point-to-point
>ip address 100.100.100.2 255.255.255.0
>frame-relay interface-dlci 112
> class voice
> vofr cisco
>!
>map-class frame-relay voice
>frame-relay cir 768000
>frame-relay bc 1000
>frame-relay mincir 120000
>no frame-relay adaptive-shaping
>frame-relay fair-queue
>frame-relay voice bandwidth 78000
>frame-relay fragment 1500
>!
>line con 0
>line aux 0
>line vty 0 4
>!
>end
>
>
>
>
>_________________________________________________________________
>Choose an Internet access plan right for you -- try MSN!
>http://resourcecenter.msn.com/access/plans/default.asp
Sema UKI Phase II Integration Team
Schlumberger Network & Infrastructure Solutions
Ohanusi Anthony
Technical Consulting
Schlumberger Network Solution
South Quay Plaza 11
138 Marsh Wall
LONDON E149SH
Tel : +44(0)2075172628
Main: +44(0)207514000
Fax: +44(0)207514002
Mail-ohanusi2000@yahoo.com
CONFIDENTIAL & PRIVILEGED COMMUNICATION
The information contained in this message is privileged, confidential, and
protected from disclosure. This message is intended for the individual or
entity addressed herein. If you are not the intended recipient, please do
not read, copy, use or disclose this communication to others; also please
notify the sender by replying to this message, and then delete it from your
system. The sender totally disclaims, and will not accept, any
responsibility or liability for the unauthorized use, or the consequences
of any unauthorized use, of this communication or message. Thank you
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:49 GMT-3