From: Nathan Chessin (nchessin@cisco.com)
Date: Wed Oct 16 2002 - 19:40:20 GMT-3
It depends on the kind of nssa area you have. An NSSA totally stubby area
will have the ABR generate the default route automatically.
If you have an NSSA area, then there are two possibilities:
1) NSSA ASBR can generate a default only when it has a default route in its
routing table.
2) NSSA ABR can generate a default route with or without a default route in
its own routing table
with the command (config-router)#area # nssa default-information originate
http://www.cisco.com/warp/public/104/nssa.html#3
Nate
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Paglia, John (USPC.PCT.Hopewell)
> Sent: Wednesday, October 16, 2002 3:12 PM
> To: 'Jay'; ccielab@groupstudy.com
> Subject: RE: nssa -default route
>
>
> When the new router comes online, and if it is configured
> with NSSA for the
> NSSA area (area x nssa), it should get the default route.
>
> John
>
>
>
> > -----Original Message-----
> > From: Jay [SMTP:ccienxtyear@hotmail.com]
> > Sent: Wednesday, October 16, 2002 5:32 PM
> > To: ccielab@groupstudy.com
> > Subject: nssa -default route
> >
> > Folks,
> >
> > If you are asked to configure a router with nssa area and
> in future you
> > will
> > have another router connected to this, would you use "nssa
> > default-information-originate" so when that other router
> comes online, it
> > will
> > be able to get to the external routes. How would you
> configure this ? We
> > all
> > know that when the new router comes online, it will not be
> able to get to
> > any
> > external routes unless it has a default route.
> >
> > thanks,
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:48 GMT-3