From: rjonathan@hotpop.com
Date: Tue Oct 15 2002 - 23:24:02 GMT-3
Hi Ayman,
There are 2 SNMP type -> SNMP Get (UDP 161)and SNMP TRAP (UDP 162).
If your purpose is only to send trap to an SNMP Manager, you don't need to
configure:
snmp-server community <community-string> {rw|ro}
The command above is to enable your SNMP Manager to do SNMP Get.
Thanks.
Ronny
Original Message:
-----------------
From: Ayman Hamza ayhamza@cisco.com
Date: Tue, 15 Oct 2002 21:13:04 +0200 (CEST)
To: ccielab@groupstudy.com
Subject: CAT 3550 : SNMP traps for mac-address-table
Dear all;
In the configuration shown in the URL below:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/1218ea1/3550scg/sw
admin.htm#xtocid72
For me it's very clear except for one thing :
Should I configure the global config mode command
snmp-server community <community-string> {rw|ro}
for the community used for the MAC-notification trap used in the command:
snmp-server host <ip> {traps|informs} version <version> <community>
mac-notification
Appreciating any comments !
Best wishes;
Ayman
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:47 GMT-3