RE: bgp cluster-id

From: Joe A (groupstudy@comcast.net)
Date: Mon Oct 14 2002 - 22:34:11 GMT-3

• Next message: rjonathan@hotpop.com: "RIP & DDR"
• Previous message: Hansang Bae: "Re: TCPIP port numbers"
• Maybe in reply to: Richard Davidson: "bgp cluster-id"
• Next in thread: Cristian Henry H: "Re: bgp cluster-id"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

You have to configure a cluster-id BEFORE you configure the RR clients,
that's all.

Joe

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Richard Davidson
Sent: Monday, October 14, 2002 5:44 PM
To: groupstudy
Subject: bgp cluster-id

When I enter this command (bgp cluster-id x) on the route reflector I
get the following error:

C(config-router)#bgp cluster-id 1
% Neighbors configured as RR-client. Deconfigure first.

I don't understand. Isn't this command supposed to be entered on the
route-reflectors? This is my show run:

router bgp 1
 bgp log-neighbor-changes
 network 172.17.1.0 mask 255.255.255.0
 neighbor 172.16.0.1 remote-as 1
 neighbor 193.16.0.2 remote-as 1
 neighbor 193.16.0.2 route-reflector-client

Rich

• Next message: rjonathan@hotpop.com: "RIP & DDR"
• Previous message: Hansang Bae: "Re: TCPIP port numbers"
• Maybe in reply to: Richard Davidson: "bgp cluster-id"
• Next in thread: Cristian Henry H: "Re: bgp cluster-id"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:47 GMT-3