Re: bgp cluster-id

From: Cristian Henry H (chenry@reuna.cl)
Date: Tue Oct 15 2002 - 12:59:50 GMT-3

Next message: Azhar Mehmood: "Dialer watch"
Previous message: steve r: "anyone have a isdn Teltone simulator for sale?"
Maybe in reply to: Richard Davidson: "bgp cluster-id"
Next in thread: Peter van Oene: "Re: bgp cluster-id"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I think that happend because the client need to refresh the clusted-id
also. Remember in a cluster when the cluster-id isn't setted manualy
first, the cluster-id is the IP addres (Router-id) of the RR and clients
learns it, if you change it then on RR, the clients need to change the
cluster-id also and may be that don't happen if you don't refresh the
neighbor ... route-reflector-client instruccion.

Any experience?

Richard Davidson wrote:
>
> When I enter this command (bgp cluster-id x) on the route reflector I get the following error:
>
> C(config-router)#bgp cluster-id 1
> % Neighbors configured as RR-client. Deconfigure first.
>
> I don't understand. Isn't this command supposed to be entered on the route-reflectors? This is my show run:
>
> router bgp 1
> bgp log-neighbor-changes
> network 172.17.1.0 mask 255.255.255.0
> neighbor 172.16.0.1 remote-as 1
> neighbor 193.16.0.2 remote-as 1
> neighbor 193.16.0.2 route-reflector-client
>
>
>
> Rich

-- Cristian E. Henry REUNA

E-mail: chenry@reuna.cl Fono: 56-2-3370336

Next message: Azhar Mehmood: "Dialer watch"
Previous message: steve r: "anyone have a isdn Teltone simulator for sale?"
Maybe in reply to: Richard Davidson: "bgp cluster-id"
Next in thread: Peter van Oene: "Re: bgp cluster-id"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:47 GMT-3