From: Raj Thava[IPC_Head Office] (traj@ipcc.ca)
Date: Fri Oct 11 2002 - 10:53:13 GMT-3
Hi
You should not remove the dialer-group statement, only think you have to do
is on R5's dialer map statement don'e give the dial string at the end of it.
Thank you
Raj Thava
CCIE#10425
----------------------------------------------------------------------------
-------------
This E-mail message (including attachments, if any) is intended for the use
of the individual or
entity to which it is addressed and may contain information that is
privileged, proprietary,
confidential and exempt from disclosure. If you are not the intended
recipient, you are notified
that any dissemination, distribution or copying of this communication is
strictly prohibited. If you
have received this communication in error, please notify the sender and
erase this E-mail
message immediately.
----------------------------------------------------------------------------
-------------
Le prisent message ilectronique (y compris les pihces qui y sont annexies,
le cas ichiant)
s'adresse au destinataire indiqui et peut contenir des renseignements de
caracthre privi ou
confidentiel. Si vous n'jtes pas le destinataire de ce document, nous vous
signalons qu'il est
strictement interdit de le diffuser, de le distribuer ou de le reproduire.
Si ce message vous a iti
transmis par erreur, veuillez en informer l'expiditeur et le supprimer
immidiatement.
----------------------------------------------------------------------------
------------
-----Original Message-----
From: Deleporte Antoine [mailto:DELEPORTE@dynetcom.fr]
Sent: October 11, 2002 9:30 AM
To: 'ccielab@groupstudy.com'
Subject: ISDN dialer-group
Hi all,
Just a question about ISDN.
R1-------(ISDN)--------R5
Both routers are configured with :
int bri0
ip address 10.0.0.X 255.255.255.252
encapsulation ppp
dialer map ip 10.0.0.Y name RY broadcast 600Y
dialer-group 1
!
!
dialer-list 1 protocol ip permit.
It's working well. Now, if I want to restrict R5 from initiate a call, I
remove dialer-group statement on R5.
My problem is : the link goes up, initiated by R1, ok, but I can't ping any
/32 addresses.
Is it normal ?
Now, if I re-put dialer-group & remove dialer-map statement on R5,
everything is working perfect.
Is dialer-group is mandatory in any isdn config ???
Thanks for your light,
Antoine
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:44 GMT-3