ISDN dialer-group

From: Deleporte Antoine (DELEPORTE@dynetcom.fr)
Date: Fri Oct 11 2002 - 10:30:00 GMT-3

• Next message: esther: "bridge 1 protocol xxx"
• Previous message: MADMAN: "Re: ls1010 GURUS"
• Next in thread: Raj Thava[IPC_Head Office]: "RE: ISDN dialer-group"
• Maybe reply: Raj Thava[IPC_Head Office]: "RE: ISDN dialer-group"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all,

Just a question about ISDN.

R1-------(ISDN)--------R5

Both routers are configured with :

int bri0
  ip address 10.0.0.X 255.255.255.252
  encapsulation ppp
  dialer map ip 10.0.0.Y name RY broadcast 600Y
  dialer-group 1
!
!
dialer-list 1 protocol ip permit.

It's working well. Now, if I want to restrict R5 from initiate a call, I
remove dialer-group statement on R5.
My problem is : the link goes up, initiated by R1, ok, but I can't ping any
/32 addresses.

Is it normal ?

Now, if I re-put dialer-group & remove dialer-map statement on R5,
everything is working perfect.
Is dialer-group is mandatory in any isdn config ???

Thanks for your light,
Antoine

• Next message: esther: "bridge 1 protocol xxx"
• Previous message: MADMAN: "Re: ls1010 GURUS"
• Next in thread: Raj Thava[IPC_Head Office]: "RE: ISDN dialer-group"
• Maybe reply: Raj Thava[IPC_Head Office]: "RE: ISDN dialer-group"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:44 GMT-3