From: Brian Dennis (brian@5g.net)
Date: Fri Oct 11 2002 - 04:40:19 GMT-3
The 2500 series routers don't support trunking.
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jung, Jin
Sent: Thursday, October 10, 2002 9:48 PM
To: ccielab@groupstudy.com
Subject: router on a stick
Need to setup router on a stick with 2520
Will not take "encapsulation" command on "e 0.21" sub interface.
switch port is ISL trunk
What am I missing?
r1>en
r1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
r1(config)#int e 0.21
r1(config-subif)#encap
r1(config-subif)#encap
r1(config-subif)#encap?
% Unrecognized command
r1(config-subif)#encap
^
% Invalid input detected at '^' marker.
r1(config-subif)#
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:44 GMT-3