router on a stick

From: Jung, Jin (jin.jung@lmco.com)
Date: Fri Oct 11 2002 - 01:48:08 GMT-3

• Next message: Erick B.: "Re: redistribute problem"
• Previous message: tukovijj: "can you swap lab date with someone within 28 days?"
• Next in thread: Tim Ross: "Re: router on a stick"
• Maybe reply: Tim Ross: "Re: router on a stick"
• Maybe reply: rjonathan@hotpop.com: "RE: router on a stick"
• Maybe reply: Brian Dennis: "RE: router on a stick"
• Maybe reply: Nathan Chessin: "RE: router on a stick"
• Maybe reply: Don: "Re: router on a stick"
• Maybe reply: Hansang Bae: "Re: router on a stick"
• Maybe reply: Don: "Re: router on a stick"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Need to setup router on a stick with 2520

Will not take "encapsulation" command on "e 0.21" sub interface.

switch port is ISL trunk

What am I missing?

r1>en
r1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
r1(config)#int e 0.21
r1(config-subif)#encap
r1(config-subif)#encap
r1(config-subif)#encap?
% Unrecognized command
r1(config-subif)#encap
                  ^
% Invalid input detected at '^' marker.

r1(config-subif)#

• Next message: Erick B.: "Re: redistribute problem"
• Previous message: tukovijj: "can you swap lab date with someone within 28 days?"
• Next in thread: Tim Ross: "Re: router on a stick"
• Maybe reply: Tim Ross: "Re: router on a stick"
• Maybe reply: rjonathan@hotpop.com: "RE: router on a stick"
• Maybe reply: Brian Dennis: "RE: router on a stick"
• Maybe reply: Nathan Chessin: "RE: router on a stick"
• Maybe reply: Don: "Re: router on a stick"
• Maybe reply: Hansang Bae: "Re: router on a stick"
• Maybe reply: Don: "Re: router on a stick"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:44 GMT-3