From: Justin Cook (Justin.Cook@computerland.co.nz)
Date: Thu Oct 10 2002 - 19:53:41 GMT-3
For vty sessions use access-class
For snmp/http type in the the access list at the end of the line i.e
Snmp-server community text ro 1
As a 2900 is a layer 2 and accesslists deal mainly layer 3 there is not much
need for them on this device
-- Justin Cook Systems Consultant MCSE +I, CCDP, CCNP(Security, Voice) Computerland Wellington DDI: 04 4606000 Cellphone: 021 2408689 Email: Justin.Cook@Computerland.co.nz <mailto:Justin.Cook@Computerland.co.nz> CAUTION: This e-mail message and accompanying data may contain Information that is confidential and subject to privilege. If you are not the intended recipient, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this e-mail in error, please notify me immediately and delete all material pertaining to this e-mail. Thank you.-----Original Message----- From: kenji tomino [mailto:ktomino@verio.net] Sent: Friday, 11 October 2002 11:13 a.m. To: ccielab@groupstudy.com Subject: Access-list on Catalyst 2900XL
Hi, all,
I need your help.
I am wondering if it is possible to configure " Access-list " on Catalyst 2900XL. There is a command line which indicates " Access-list" in global config mode.
However, I could not find any commands which connect the access-list that I created to the interface...
Do I need to upgrade the IOS ? Or is there any other way to activate the access-list?
BTW , CCO says that if it is C2950 with IOS12.1(11)EA or 12.1(6)EA2, it is possible to configure the access-list without any difficuluty.
Thank you!!
Kenji Tomino
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:44 GMT-3