From: Dave Stoddard (dave@stoddard.net)
Date: Thu Oct 10 2002 - 11:29:40 GMT-3
You control the version of RIP v1 & v2 that is being sent/received per
interface by the following commands....
interface ##
ip rip send version #
ip rip receive version #
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Carl Willias
Sent: Thursday, October 10, 2002 6:48 AM
To: ccielab@groupstudy.com
Subject: Disappearing Routes
I am redistributing between RIP and IGRP. I have IGRP
routes that are being sent to a 6513 with a MSFC card
acting as a router. The router then redistributes the
routes into RIPv2 but sends them out in both v2 and v1
formats (we have Sun firewalls that do not understand
v2). for some reason the routes will appear in the
route table for a couple of weeks then disappear and
the only way to get them back into the route table is
to use static routes. I can see the routes coming in
via IGRP but cannot see them in the RIP database on
the 6513. The only thing that the routes have in
common is that they are all in the 192.x.x.x network
while my 6513 is in a different class B.
Can anyone help?
K
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:44 GMT-3